RouterBoard Mikrotik Hardware

Cloud Core Router 1009-8G-1S-1S+

The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU.

CCR1009-8G-1S-1S+ comes with 2GB of RAM, eight Gigabit Ethernet ports (Ether1-4 are in a Switch group), one SFP port and one SFP+ port with 10G support (SFP module not included).

CCR1009-8G-1S-1S+ model have dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).

Also, CCR1009-8G-1S-1S+ supports a Smart card, to store your private key for use in all features that support Certificate based authentication.

SFP+ port supports SFP (1.25G) modules as well.

Product specifications

Details
Product code CCR1009-8G-1S-1S+
SFP DDMI Yes
CPU nominal frequency 1.2 GHz
CPU core count 9
Size of RAM 2 GB
Architecture TILE
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 8
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model None
Number of USB ports 1
Power Jack 2
802.3af support Yes
Supported input voltage 12 V - 57 V
PoE in 802.3at
PoE out No
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor Yes
Dimensions 444x175x47mm
Operating System RouterOS
Operating temperature range -20C .. +60C
License level 6
Antenna gain DBI No
Current Monitor Yes
CPU TLR4-00980CG-10CE
Max Power consumption 35 W
SFP ports 1
SFP+ ports 1
USB slot type microUSB type AB
Number of chains 0
Serial port RS232 + Header

Included parts

Performance test results

CCR1009-8G-1S-1S+   RouterOS v6.2  
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging fast path 11,249.0 7,379.3 2,200.0 9,328.0 974.0 11,968.5
Bridging 25 Bridge filter rules 1,509.0 989.9 1,434.0 6,080.2 974.0 11,968.5
Routing fast path 9,931.0 6,514.7 1,982.0 8,403.7 974.0 11,968.5
Routing 25 Simple Queues 1,942.0 1,274.0 1,789.0 7,585.4 974.0 11,968.5
Routing 25 Firewall filter rules 765.0 501.8 711.0 3,014.6 614.0 7,544.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results